GustavoThanks for packaging.Your packages are well designed and prepared carefully. Looks fine!
VictorThank you, Zoe. I just let you know I was quoting around 5 people about laser source. There were cheaper offers but I choose you in the end. I like your company especially the service.
StefanoThe machine looks sturdy...well built.. like it!
Air - Cooled Fiber Laser Source Compact Design Deep Carved For Non Metallic Plating
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Fiber Laser Source||Laser Power||20,30, 50w|
|Warranty||2 Years||Fiber Length||1.9m 3m Optional|
fiber laser generator,
fiber laser power source
20w 30w 50w Fiber Laser Source Maxphotonics Fiber Laser Module For Marking
The Q-Switched Pulsed Fiber Laser (MFP5W-50W) Series products provide a wide range of lasers, the emission wavelength of which is centered at 1064nm. They are air-cooled and maintenance-free and deliver high efficiency, high reliability, and high performance on marking and engraving, which makes them ideal tools in this area.
Maxphotonics' Q-Switched Pulsed Fiber Laser (MFP5W-50W) Series are Class 4 laser products and are designed and tested with safety. By following this User Guide and applying sound laser safety practices, it will be a safe and reliable device.
Laser light exhibits unique characteristics that may pose safety hazards. Therefore, the laser light can’t be normally associated with other light sources, and all operators and people near the laser must be aware of these special hazards.
1. Short turning on time,short pulse,high peak power,wide repetitive frequency range.
2. There is no leak when the lasers are switched off.
3. There is no shadow and Virtual circuit when process the special materials.
4. Anti-high-reflection function,could do machining on the materials of gold , silver,aluminium,copper etc.
5. Compact design.
6. High reliability,long lifetime.
7. Universal 25 pins interface.
8. 3D outward design.
|Optical Characteristic Parameters|
|3||Beam Quality M2||Pout=Pnom||1.1||1.3||1.6|
|6||Average Optical Power(Pnom)||MFP-5W||4.5||5||5.5||W|
|8||Single Pule Energy||MFP-5W||0.45||mj|
|9||Optical Pulse Width(FWHM)||90||100||110||ns|
|10||Pulse Repetition Frequency (PRF.)||MFP-5W||10||30||KHz|
|11||Output Power Stability||Pout=Pnom||5||%|
|14||Delivery Cable Length||1.9||2.5||3||M|
|15||Laser Startup Time||Pout=Pnom,10%~90%||110||140||us|
|16||Laser Shutdown Time||Pout=Pnom,90%~10%||110||150||us|
|General Characteristic Parameters|
|1||Operating Environment Tem.||10||42||℃|
|4||Warm Up Time||-Operate||1||min|
|5||Operating Environment humidity||10||95||%|
|For reference only. Other beam diameter avai lable by order.|
Widely used marking on metal, part of the non-metallic plating materials, plastic rubber, industrial-used plastics, ceramics and other marking, Deep carved, Fine processing, Special material processing.