How to Replace Raycus Fiber Laser Power Module

May 7, 2024

When it comes to fiber laser cutting machines, the power module is one of the most important components. It provides the laser with the


necessary energy to cut through various materials. If this component fails, then your machine won't be able to function properly. So, it is crucial


to know how to replace a Raycus fiber laser power module. Here's what you need to do:


Step 1. Turn off the laser machine and disconnect it from the power supply.


Step 2. Remove the cover of the laser machine and locate the power module.


Step 3. Disconnect the power supply and fiber optic cables from the power module. Use a marker or tape to label these cables to make


reassembly easier.


Step 4. Unscrew the nuts that are holding the power module in place. You may need to use a socket wrench or pliers.


Step 5. Carefully remove the old Raycus fiber laser power module from the machine and keep it aside.


Step 6. Take the new power module and attach it in the same place where the old one was. Hold it in place with the nuts you removed earlier.


Tighten them securely.


Step 7. Reconnect the fiber optic and power cables to the new power module. Double-check that they are connected correctly.


Step 8. Replace the cover of the laser machine and screw it back in place.


Step 9. Reconnect the power supply and turn on the laser machine to test if it is working properly.


Although replacing a Raycus fiber laser power module may seem daunting at first, it is a task that can be easily accomplished with the right


tools and steps. If you encounter any problems during the replacement process, seek help from a professional technician. Doing so will


prevent accidents and save you from additional costs and headaches. Remember to maintain your laser machine in good condition to ensure


optimal productivity and quality cuts.