Payment & Shipping Terms:
|Product Name:||Fiber Laser Source||Laser Power:||50w|
|Frenquency:||30-60KHz||Operation Voltage:||24 VDC|
|Fiber Length:||1.9M, 3M||Package Dimension:||68*43*22CM|
fiber laser module,
fiber laser power source
50W Fiber Laser Source MFP-50 for Barcode Marking on Metal and Plastic
As the most representative products, the series of MaxPulse Q-Switch pulse fiber lasers use the design of high reliability and high integration, gather all of the advantages in one fancy package, and have been accepted by numerous customers, and occupied more market shares among all of the similar products, the most appropriate word for it, is "installing means enjoying".
1) no leakage of light when shut down the laser
2) Compact structure, small volume
3) DB25 interface control mode
4) narrow optical pulse, high peak power and wide repetition frequency range
5) High reliability and long service life
6) Three-dimensional appearance design
|Central Emission Wavelength||nm||1064±4||1064±4||1064±4||1064±4||1064±4|
|Nominal Output Power||w||10||20||30||50||100|
|Single Pulse Energy||mj||0.5~0.6||0.8~1.0||0.8~1.0||0.8~1.0||0.8~1.0|
|Output Power Tunability||%||5~100||5~100||5~100||5~100||5~100|
|Cooling||Air Cooling||Air Cooling||Air Cooling||Air Cooling||Air Cooling|
(All parameters is believed to be accurate and is subject to change without notice.)
Typical Applications of fiber laser:
Widely used marking on metal, part of the non-metallic plating materials, plastic rubber, industrial-used plastics, ceramics and other marking, Deep carved, Fine processing, Special material processing.
1) ISO 9001:2008
2) CE Certificate
Outer: Carton fastended with nylon packing straps
100 Q&C employees, 20 PMC staff, 100% finished product will be tested for 24*6 hours.
80 R&D employees,80% with master degrees in optics major, 2 R&D leaders with PHD degrees.
Procution workshop and production capability:
Advanced production lines with over 1000 production employees, our annual production capability is 20,000 sets.
After sales service and Warranty:
2 Years from the shipping date, our after sales service department is online 7/24, so just feel free if you have any after sales questions or problems.
When the warranty period expires, we are also willingly to help our customers to cope with different problems. And our customers only need to bear the cost of components, and we guarantee the best price.
Working environmental temperature:
The proper working environmental temperature of our lasers are 0-40 degree celsius.
The lifetime of the lasers are 100,000 hours, the lifetime of the pump diode is 100,000 hours.
Questions usually been asked by the customers:
1) Does the laser have "auto verification" mode in which it can diagnose itself for possible problems?
=> It has a protection software inside.
2) Can an abrupt electricity cut damage the laser? Is it necessary to connect the laser to electricity via UPS?
=> an abrupt electricity cut won't damage the laser, our laser has been tested in this way for many many times. Not necessary to connect to UPS.
3) Is the laser filled with neutral gas (we are thinking about the risk of opening it by the customs at the border)?
=> No neutral gas, it's safe.
4) Can anything bad happen to the laser if it is scanned by X-ray on the border?
=> Please don't worry, our laser has been sold to many countries, it very safe. Because there is no dangerous materials in it that will lead to fire or explosion.
5) Does the laser have a CE certificate necessary to be sold to European Union?
Contact Person: zoezhong