Payment & Shipping Terms:
|Model:||Laser Cutting Machine Price||Laser Power:||1000W/1500W/2000W And Above|
|Working Life Of Fiber:||More Than 100000 Hours||Working Area:||1500*3000mm|
|Fiber Laser Cutting Head:||Cypcut||Maximum Running Speed:||1200mm/s|
|Auxiliary Gas:||Oxygen, Nitrogen, Air||CPU:||32 Bit/64bit|
2000w Laser Cutting Machine,
1500W Laser Cutting Machine,
2000w Metal Cutting Laser Cutter
Anti Burning Sheet 2000w Laser Cutting Machine Metal Cutting Laser Cutter
Laser Cutting Machine Price Competitve machine details
Laser beam part
The beam body adopts the integral cast aluminum method, annealing to eliminate internal stress. The process flow is casting→annealing stress→rough machining→vibration aging→semi-finishing→vibration aging→finishing, machine tempering, processing, strength, rigidity and ensuring the beam The stability can maintain the accuracy of the beam for a long time. It mainly provides an effective guarantee for the high-speed cutting of the high-power laser cutting machine.
Graphite anti-burning technology
The area where the laser can be shot in the entire machine tool is covered and protected by 20mm thick graphite anti-burn.
Ensure that the bed and workbench are not deformed or burned out.
The beams are installed on a pair of precision linear guides, using advanced engineering and precision manufacturing to create the highest quality linear system today.
Metal Laser Cutting Machine specificaiton
|Model||RL-1530 Metal fiber laser cutting machine|
|Laser Power||1000W/1500W/2000W Raycus|
|Laser Wave Length||1064nm|
|Working Table||Saw tooth|
|Maximum Idle Running Speed||1200mm/s|
|Minimum Line Width||± 0.02mm|
|Software and Control System||Cypcut|
|Position Type||Red dot|
|Auxiliary Gas||oxygen, nitrogen, air|
|Air Proportional Valves||For power 1000W and higher|
|Working life of fiber module||More than 100000 hours|
|Fiber laser cutting head||Raytools|
|Software||Compatible with various formats|
|Water cooling system||S&A industry chiller|
|Motor||Japan Yasakawa two 850W Y motors + 850W X motor|
|Reducer||ASG From Japan|
|Liner guider system||Taiwan HIWIN|
|Electric component||Schneider made in France|
Metal Laser Cutting Machine Samples
More questions about the Laser Cutting Machine Price
1. What is a fiber laser cutting machine?
Fiber laser is a special type of solid-state laser. Generally, fiber lasers are optically pumped. This is achieved by coupling the radiation of a diode laser or other fiber laser to the cladding or the core itself in a direction parallel to the fiber core. In many cases, double-clad fiber is used to obtain higher output power.
2. What materials can fiber laser cut?
Various metals, such as stainless steel, carbon steel, low carbon steel, galvanized steel, aluminum, copper, etc.
3. Which fiber laser source is used?
IPG-Made in USA.
Raycus- Made in China;
Maxphotonics-Made in China.
Contact Person: Sophia