The laser cutting process replaces the traditional mechanical knife with an invisible beam. It has high precision, fast cutting, not limited to the limitation of the cutting pattern, automatic typesetting, saving materials, smooth cutting, and low processing cost. The application of metal laser cutting machine is very extensive, covering many industries, and it is one of the necessary equipment for many enterprises.
The laser cutting machine is a technological revolution in sheet metal processing, and it is the "processing center" in sheet metal processing. The laser cutting machine has high flexibility, fast cutting speed, high production efficiency, and short product production cycle. It has won a wide range of customers market.
The 10,000-watt laser cutting machine is equipped with Industry 4.0 automatic loading and unloading warehouse, which is safe and efficient with strong cooperation
The laser cutting machine can maintain a good working condition for a long time, and daily maintenance is the key. It can not only effectively reduce the loss of the equipment parts, but also extend the service life. So, what are the normal maintenance procedures for laser cutting machines?
Decrypt the normal maintenance process of the laser cutting machine:
1. Cleaning up the dust removal device
When the dust removal device of laser cutting machine is used for a long time, a lot of solid dust will accumulate in the fan, resulting in loud noise, odor, and unsmooth exhaust. Treatment method: turn off the power, remove the air inlet and outlet pipes on the fan, clean up the dust inside, invert the fan, pull out the blades, clean up the solid dust and restore the installation.
2. Cleaning of machine dust, support bars, etc.
Clean up the dust inside the machine tool every week. Use an air gun to clean up the dust cover, drag chain, electrical cabinet and sheet metal inside the machine tool. Clean the air path components inside the cutting head cover and the cutting head. Note that when cleaning the cutting head, it is recommended to use a smaller air pressure or blow dust at a longer distance. Clean the cutting head waste and iron slag on the guide rails of the working table, and reduce the movement of the equipment exchange table, which is a problem with the chain.
Regularly clean the iron slag of the support bar. If there is enough iron slag on the working table, it will cause the plate to be placed unevenly, shake when cutting, and cause the stability of the cut plate and the anti-slag on the reverse side. When the support table suffers a large loss during long-term cutting, a limit alarm will appear. It is recommended to make the support table in advance and replace it in time.
3. Cleaning and refueling the rack of machine tool rails
The guide rail and linear axis are one of the core components of the laser cutting machine, which play a guiding and supporting role. To ensure the machining accuracy, the guide rails and straight lines are required to have high guiding accuracy and good movement stability. The laser cutting machine will produce a large amount of corrosive dust and smoke during the processing of the processed parts. These smoke and dust will be deposited on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment. Maintenance of the rack and pinion.
Open the dust cover to clean up the oil and foreign matter on the rack and guide rail. It is recommended to use diesel to clean the rack of the guide box, and then move the machine tool to wash out the foreign matter inside the slider. After cleaning, wipe off the excess diesel and apply a layer of gear lubricant. Regularly check whether the lubricating oil in the oil tank of the equipment is below the alarm line, and add lubricating oil in time to avoid the wear of the equipment and the change of accuracy caused by the lack of oil for a long time.
What are the precautions for the daily maintenance/weekly maintenance/monthly maintenance and quarterly maintenance of the laser cutting machine?
4. Water change and cleaning of the chiller
The water quality and temperature of the circulating water directly affect the service life of the laser and the cutting head. Note: The maintenance of the chiller must be performed at least 5 minutes after turning off the power of the chiller to avoid the danger of water spray and electric shock. Inspect the filters and heat sinks weekly to clean up dust and foreign objects; check the liquid level of the water tank, and replenish water in time when the liquid level is low; remove dust and decontamination outside the equipment. Inspect and replace the medium (distilled water) quarterly; check the dirt in the cleaning tank to ensure good cooling effect; the PP cotton must be replaced, and the resin tank must be replaced
Contact Person: Mr. Alex Ren