Payment & Shipping Terms:
|Power:||20w/30w/50w||Laser Source Brand:||RAYCUS|
|Application:||Laser Marking||Optional Marking Area:||110mm*110mm/150mm*150mm/300mm*300mm|
|Cooling Mode:||Air Cooling||Marking Depth:||≤0.5mm|
Raycus Source Flying Laser Marking Machine,
Raycus Source Laser Engraver,
Laser Engraver For Metal
Raycus Source Flying Laser Marking Machine Laser Engraver For Metal Gold Silver
1. High-quality laser scanning system makes marking faster.
2. Using advanced fiber generator, the service life can reach 100,000 hours.
3. High-precision repositioning accuracy is 0.003mm.
4. Environmental protection and energy saving, compared with YAG laser, power consumption is reduced by 3-10 times. The use cost is really cheap.
5. The fiber laser marking machine is maintenance-free, and hardly need to replace any parts for long-term use.
6. The fiber laser marking machine is very easy to use, even a novice can use it well.
How to choose a suitable fly line marking system?
1. What do you want to mark? Metal or non-metal
Fiber lasers are used to mark metal parts, while CO2 lasers are used to mark non-metal parts.
2. What is your marked area?
Usually our marking area is 70mm * 70mm-300mm * 300mm
3. Do you want to mark on a plane or curved surface?
The standard model can be marked on a flat surface, if you want to mark on a curved surface, you need a rotating fixture ($200)
4. What is your marking depth?
All laser marking depths are less than 1mm, but if you continue to mark and mark, the depth will be deeper.
Fly line marking system Technical data:
|Optional Marking Area||110mm*110mm/150mm*150mm/300mm*300mm|
|Minimum Line Width||0.012mm|
|Life-span of Fiber Laser Module||100 000hours|
|Beam Quality||M2 <1.5|
|Focus Spot Diameter||<0.01mm|
|Output Power of Laser||10%~100% continuously to be adjusted|
|System Operation Environment||Windows XP / W7--32/64bits / W8--32/64bits|
|Cooling Mode||Air cooling--Built-in|
|Temperature of Operation Environment||15℃~35℃|
|Power Input||220V / 50HZ / single phase or 110V / 60HZ / single phase|
|Optional (Not free of charge)||Rotary Device, Moving Table, other customized Automation|
Q1: What should I do if there is a problem with this machine?
We provide a two-year machine warranty. During the two-year warranty period, if there is any problem with the machine, we will provide parts for free (except for man-made damage). After the warranty, we still provide lifetime service. Therefore, if you have any questions, please let us know and we will provide you with a solution.
Q2: What are the consumables of the laser marking machine?
Answer: It has no consumables. This is very economical and cost-effective.
Q3: What kind of packaging can protect the product?
Answer: We have 3 layers of packaging. For the exterior, we use wooden boxes without fumigation. In the middle, the machine is covered with foam to protect the machine from vibration. The inner layer of the machine is covered with a waterproof plastic film.
Q4: What is the delivery time?
Answer: Usually, the delivery time is within 5 working days after receiving the payment.
Contact Person: Sophia