Payment & Shipping Terms:
|Product Name:||Mini Portable Laser||Control Software:||MAXCAD|
|Laser Source:||Max Or Raycus||Marking Range:||100/200 Mm|
|Marking Speed:||600-1000characters/Min||Focusing Mode:||Support For Automation Or Manual|
Handheld Fiber Laser Marking Machine,
Mini Fiber Laser Marking Machine,
mini fiber laser marking machine
Mini Handheld Fiber Laser Marking Machine For Metal Diffferent Code Sn Number
Handheld Laser Marking Machine For Diffferent Code Sn Number Marking On Metal And Plastic discription:
20W portable laser engraving metal laser printer is used for aluminum stainless steel label. Fiber laser marking machine adopts computer control, environmental protection, and has the advantages of non-contact wear-resistant permanent engraving. It can be engraved on almost any type of material including precious metals. .
* Compact: a high-tech product integrating laser equipment, computers, automatic controllers and precision machinery.
* High precision: The repositioning precision is 0.002mm.
* High speed: the scanning system makes the scanning speed up to 7m/s.
* Simple operation: Provide special coding software based on Windows
* High reliability: MTBF>100,000 hours.
* Energy saving: photoelectric conversion efficiency is as high as 30%.
* Low operating cost: no wearing parts. Free maintenance.
Mini portable laser Specification
|Laser power||9.5±0.5 W||19.5±0.5 W|
|Laser source||Max or Raycus|
|Laser wavelength||1064 nm|
|Beam quality||M2 < 1.4|
|Modulation frequency||20-50 khz||30-60 khz|
|Marking range||100/200 mm|
|Carving speed||0-8000 mm/s|
|Focusing mode||Support for automation or manual|
|Minimum line width||0.02 mm|
|Minimum characters||0.15 mm|
|Repeatability accuracy||±0.002 mm|
|Cooling method||Air Cooling|
|Use environment||IP4 Clean, dustless or less dusty|
|Laser indicator||Double Red dot pointer|
|working temperature||10-35 ℃|
|Power consumption of the whole machine||≤ 100 W||≤ 160 W|
|Electricity demand||AC220V±10%,50 HZ|
Mini portable laser samples
Mini portable laser Video
1. Our training
Control software operation training
Standardized on/off operation training
Description of technical parameters and their setting range
Basic daily cleaning and maintenance of the machine
Solutions to common hardware problems
Other problems in daily production and technical advice training
2. Training can be handled in the following ways:
Customers' workers can come to our factory to receive the most professional hands-on training.
We can send engineers to the customer's country to train the workers in the customer's target factory. However, daily consumption such as tickets, board and lodging should be borne by the customer.
Remote training is conducted through Internet tools such as instant messaging software such as Team-viewer and Skype.
Contact Person: Sophia